
تعداد نشریات | 45 |
تعداد شمارهها | 1,219 |
تعداد مقالات | 10,473 |
تعداد مشاهده مقاله | 20,218,618 |
تعداد دریافت فایل اصل مقاله | 13,907,617 |
مقایسه توان مصرفی دستگاه تولید پلاسما به روش تخلیه سد دیالکتریک سطحی (SDBD) با ساختارهای مشبک و شانهای | ||
فصلنامه علمی اپتوالکترونیک | ||
دوره 6، شماره 4 - شماره پیاپی 17، شهریور 1403، صفحه 35-42 اصل مقاله (446.12 K) | ||
نوع مقاله: پژوهشی | ||
شناسه دیجیتال (DOI): 10.30473/jphys.2024.70988.1189 | ||
نویسندگان | ||
سولماز جمالی1؛ آمنه کارگریان* 2؛ نرگس رضوی نیا1؛ مهدی بخش زاد محمودی1 | ||
1پژوهشکده پلاسما و گداخت هسته ای، پژوهشگاه علوم و فنون هسته ای | ||
2پژوهشکده پلاسما و گداخت هسته ای- پژوهشگاه علوم و فنون هسته ای | ||
چکیده | ||
پلاسمای غیرحرارتی فشار اتمسفری پایدار و یکنواخت تولیدشده توسط دستگاه تخلیه سد دیالکتریک سطحی قابلیت کاربرد در صنایع مختلف را دارد. بررسی ویژگیهای الکتریکی بهویژه محاسبه توان مصرفی این دستگاه با توجه به اهمیت مقرون بهصرفه بودن استفاده از آن در صنایع، حائز اهمیت می-باشد. در این مقاله، میزان توان مصرفی سامانه تخلیه سد دیالکتریک سطحی با دو ساختار متفاوت بررسی شده است. بدین منظور، دو سامانه تخلیه سد دیالکتریک سطحی با جنس و ابعاد الکترودها و دیالکتریک یکسان و دو ساختار متفاوت الکترود شانهای و مشبک طراحی و ساخته شدند. پس از آن، در شرایط کاری یکسان، توان مصرفی هر دو سامانه با استفاده از روش خازن ناظر اندازهگیری و مقایسه شدند. هدف از انجام این مطالعه انتخاب ساختار مناسب الکترود در طراحی دستگاه تخلیه سد دی-الکتریک سطحی با قابلیت کاربرد در صنایع مختلف است. | ||
کلیدواژهها | ||
تخلیه سد دیالکتریک سطحی؛ توان مصرفی؛ ساختار شانهای؛ ساختار مشبک؛ روش خازن ناظر | ||
عنوان مقاله [English] | ||
Comparing the Power Consumption of the Surface Dielectric Barrier Discharge (SDBD) Plasma Devices with Grid and Comb Structures | ||
نویسندگان [English] | ||
Soolmaz Jamali1؛ Ameneh Kargarian2؛ Nargess Razavinia1؛ Mehdi Bakhshzad Mahmoudi1 | ||
1Plasma and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute | ||
2Plasma and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute | ||
چکیده [English] | ||
The stable and uniform non-thermal plasma in atmospheric pressure produced by the surface dielectric barrier discharge (SDBD) device can be used in various industrial applications. Investigation of the electrical properties, especially the measurement of the power consumption of this device, is significant because of the cost-effectiveness importance of its uses in industries. In this paper, the power consumption of the SDBD system with two different structures has been investigated. For this purpose, two SDBD systems with the same material and dimensions of electrodes and dielectric and two different structures comb and mesh electrodes were designed and constructed. After that, under the same conditions, the power consumption of both systems was measured and compared using the monitoring capacitor method. The purpose of this study is to choose the appropriate structure for the electrode in designing of the SDBD device for various industrial applications. | ||
کلیدواژهها [English] | ||
Surface Dielectric Barrier Discharge, Power Consumption, Comb Structure, Grid Structure, Monitoring Capacitor Method | ||
مراجع | ||
[1] Nehra, V., Kumar, A., & Dwivedi, H. K. (2008). Atmospheric non-thermal plasma sources. International Journal of Engineering, 2(1), 53-68
[2] Schutze, A., Jeong, J. Y., Babayan, S. E., Park, J., Selwyn, G. S., & Hicks, R. F. (1998). The atmospheric-pressure plasma jet: a review and comparison to other plasma sources. IEEE transactions on plasma science, 26(6), 1685-1694.
[3] Fridman, A., Chirokov, A., & Gutsol, A. (2005). Non-thermal atmospheric pressure discharges. Journal of Physics D: Applied Physics, 38(2), R1.
[4] Chirokov, A., Gutsol, A., & Fridman, A. (2005). Atmospheric pressure plasma of dielectric barrier discharges. Pure and applied chemistry, 77(2), 487-495.
[5] Subedi, D. P., Joshi, U. M., & Wong, C. S. Dielectric barrier discharge (DBD) plasmas and their applications. Plasma Science and Technology for Emerging Economies: An AAAPT Experience. 693-737 (2017).
[6] Xu, X. (2001). Dielectric barrier discharge properties and applications. Thin solid films, 390(1-2), 237-242.
[7] Kogelschatz, U. (2003). Dielectric-barrier discharges: their history, discharge physics, and industrial applications. Plasma chemistry and plasma processing, 23(1), 1-46.
[8] Wagner, H. E., Brandenburg, R., Kozlov, K. V., Sonnenfeld, A., Michel, P., & Behnke, J. F. (2003). The barrier discharge: basic properties and applications to surface treatment. Vacuum, 71(3), 417-436.
[9] Huang, X., Zhou, S., & Liu, M. (2018). Investigation of the coupled volume dielectric barrier discharge for ozone formation in open atmospheric air. IEEE Transactions on Plasma Science, 46(8), 2887-2893.
[10] Šimek, M., Ambrico, P. F., De Benedictis, S., Dilecce, G., Prukner, V., & Schmidt, J. (2010). behaviour in a N2–NO surface dielectric barrier discharge in the modulated ac regime at atmospheric pressure. Journal of Physics D: Applied Physics, 43(12), 124003.
[11] Ran, S., Wang, J., Lei, B., Liu, S., Li, J., Wang, Y., ... & Tang, J. (2022). Numerical simulation of coaxial–coplanar dielectric-barrier discharge in atmospheric helium. AIP Advances, 12(5).
[12] Subrata Roy, Bhaswati Choudhury, Judith Johnsonو Alexander Schindler‑Tyka (2021) Application of dielectric barrier discharge for improving food shelf life and reducing spoilage, Scientific Reports 11, 19200
[13] f. Ambrico, Milan Simek, caterina Rotolo, Massimo Morano, Angelantonio Minafra, Marianna Ambrico, Stefania pollastro, Donato Gerin, francesco faretra, Rita M. De Miccolis Angelini (2020) surface Dielectric Barrier Discharge plasma: a suitable measure against fungal plant pathogens, Scientific Reports 10, 3673
[14] Samira Elaissi and Norah A. M. Alsaif, (2023) Modelling of Nonthermal Dielectric Barrier Discharge Plasma at Atmospheric Pressure and Role of Produced Reactive Species in Surface Polymer Microbial Purification, Polymers, 15, 1235
[15] Audier, P., Rabat, H., Leroy, A., & Hong, D. (2014). Experimental investigation of a surface DBD plasma actuator at atmospheric pressure in different N2/O2 gas mixtures. Plasma Sources Science and Technology, 23(6), 065045.
[16] Kargarian, A., Jamali, S., & Bakhshzad Mahmoudi, M. (2024). Design and Construction of a Plasma Generation Device Using the Surface Dielectric Barrier Discharge (SDBD) Method in a Laboratory Scale. Iranian Journal of Applied Physics.
[17] Ashpis, D. E., Laun, M. C., & Griebeler, E. L. (2017). Progress toward accurate measurement of dielectric barrier discharge plasma actuator power. AIAA Journal, 55(7), 2254-2268. | ||
آمار تعداد مشاهده مقاله: 373 تعداد دریافت فایل اصل مقاله: 205 |