تعداد نشریات | 41 |
تعداد شمارهها | 1,129 |
تعداد مقالات | 9,668 |
تعداد مشاهده مقاله | 17,604,506 |
تعداد دریافت فایل اصل مقاله | 12,291,431 |
Preparation of Organo Nanoclay Incorporated Polyamide/ Melamine Cyanurate/Nanoclay Composites and Study on Thermal and Mechanical Behaviours | ||
Iranian chemical communication | ||
مقاله 9، دوره 4، Issue 1, pp. 1-132, Serial No. 10، فروردین 2016، صفحه 102-114 اصل مقاله (235.93 K) | ||
نوع مقاله: Original Research Article | ||
نویسندگان | ||
Shahryar Pashaei1؛ Soleyman Hosseinzadeh* 2 | ||
1Department of Chemistry, Payame Noor University(PNU),P.O.Box,19395-3697 Tehran, Iran | ||
2Department of Chemical Engineering, Payame Noor University, Tehran, Iran | ||
چکیده | ||
This study focuses on achieving high stiffness/strength and good FR characteristic of nylon 66/MCA/NC nanocomposites, prepared via melt compounding by twin screw extruder. A synergistic effect of flame retardant systems based on melamine cyanurate and zinc borate on the flammability and mechanical behaviours of crysnanoclay reinforced nylon 66 nanocomposites have been reported. Mechanical test results indicated that all composites exhibited higher stiffness than pristine nylon 66. Thermal characteristics were performed using thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA). TGA thermograms indicate a significant increase in thermal stability after incorporation of flame retardants additives to nylon 66 matrices. A slight reduction in HDT and marked reduction in izod impact strength after incorporation of flame retardant into nylon 66/MCA/NC nanoomposite was observed. | ||
کلیدواژهها | ||
Polyamide 66؛ nanocomposites؛ flame retardant؛ mechanical performance؛ thermal characterization, crysnanoclay | ||
مراجع | ||
[1] L.A. Utracki, M.R. Kamal, Arabian J.Sci.Eng, 2002, 25,43-52.
[2] M. Alexandre , P. Dubois, Mater Sci Eng; 2000, 28, 1–63.
[3] J.M. Gloaguen, J.M. Lefebvre, Polym; 2001, 42, 5841–5847.
[4] T.D. Fornes, D.R. Paul, Polym, 2003, 44, 4993–5013.
[5] J.W. Cho, D.R. Paul, Polymer, 2001, 42, 1083-1094.
[6] L. Cauvin, N. Bhatnagar, M. Brieu, D. Kondo, C.R. Mecanique, 2007, 335, 702–707.
[7] S. Pashaei, Siddaramaiah , A.A. Syed, J. Macromolecular Sci. Part A: Pure and Appl Chem; 2010, 47, 777–783.
[9] B. Han, G.D. Ji, S.S. Wu, J. Shen, Eur Polym J., 2003, 39, 1641–1646.
[10] S. Lei, H. Yuan, H. Qingliang, Y. Fei, J Fire Science, 2006, 26, 475.
[11] B.D. Agarwal, L.J. Broutman, 2nd Ed. John Wiley and Sons, Inc; 1990.
[12] H. Liu, L.C. Brinson, Compo Sci Tech, 2008, 68, 1502-1512.
[13] Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, J Materials Research; 1993, 8, 1185–1189.
[14] T. Jeevananda, Siddaramaiah. Thermochemica. Acta., 2001, 376, 51-61.
[15] S. Hamdan, Md. Saiful Islam, A.S. Ahmed, Md. Rezaur Rahman, J. Appl. Polym. Sci., 2013, 128(3), 1842–1847.
| ||
آمار تعداد مشاهده مقاله: 2,427 تعداد دریافت فایل اصل مقاله: 1,727 |